纤维素直接催化转化制乙二醇及其他化学品:从基础研究发现到潜在工业应用(英)

纤维素直接催化转化制乙二醇是一条极具吸引力的生物质转化途径,有助于减轻化石能源资源的消耗。综述了从该反应途径的发现到获得高效、高稳定性催化剂的快速发展过程。基于对钨基催化剂的大量研究结果,本文讨论了反应机制,明确了反应路径、催化剂状态、钨物种及加氢催化活性中心各自在串联反应中的作用。围绕该反应过程的工业化应用需要,讨论了有关原生木质纤维素生物质催化转化以及高效反应过程的发展策略。在此基础上,将纤维素催化转化制乙二醇过程与生物质发酵制丙酮-丁醇-乙醇的生物炼制路线进行整合,构建出一个理想的反应过程潜在应用范例。最后,对纤维素催化转化制乙二醇反应过程进行了总结和前景展望.     

Stepwise Assembly of Turn-on Fluorescence Sensors in Multicomponent Metal–Organic Frameworks for in Vitro Cyanide Detection

The controlled synthesis of multicomponent metal–organic frameworks (MOFs) allows for the precise placement of multiple cooperative functional groups within a framework, leading to emergent synergistic effects. Herein, we demonstrate that turn-on fluorescence sensors can be assembled by combining a fluorophore and a recognition moiety within a complex cavity of a multicomponent MOF. An anthracene-based fluorescent linker and a hemicyanine-containing CN⁻-responsive linker were sequentially installed into the lattice of PCN-700. The selective binding of CN⁻ to hemicyanine inhibited the energy transfer between the two moieties, resulting in a fluorescence turn-on effect. Taking advantage of the high tunability of the MOF platform, the ratio between anthracene and the hemicyanine moiety could be fine-tuned in order to maximize the sensitivity of the overall framework. The optimized MOF-sensor had a CN⁻-detection limit of 0.05 μm , which is much lower than traditional CN⁻ fluorescent sensors (about 0.2 μm ).     

ZIF-Induced d-Band Modification in a Bimetallic Nanocatalyst: Achieving Over 44 % Efficiency in the Ambient Nitrogen Reduction Reaction

The electrochemical nitrogen reduction reaction (NRR) offers a sustainable solution towards ammonia production but suffers poor reaction performance owing to preferential catalyst–H formation and the consequential hydrogen evolution reaction (HER). Now, the Pt/Au electrocatalyst d-band structure is electronically modified using zeolitic imidazole framework (ZIF) to achieve a Faradaic efficiency (FE) of >44 % with high ammonia yield rate of >161 μg mg_cat⁻¹ h⁻¹ under ambient conditions. The strategy lowers electrocatalyst d-band position to weaken H adsorption and concurrently creates electron-deficient sites to kinetically drive NRR by promoting catalyst–N₂ interaction. The ZIF coating on the electrocatalyst doubles as a hydrophobic layer to suppress HER, further improving FE by >44-fold compared to without ZIF (ca. 1 %). The Pt/Au-N_ZIF interaction is key to enable strong N₂ adsorption over H atom.     

Host-Guest Chemistry of Truncated Tetrahedral Imine Cages with Ammonium Ions

Three shape-persistent [4+4] imine cages with truncated tetrahedral geometry with different window sizes were studied as hosts for the encapsulation of tetra-n-alkylammonium salts of various bulkiness. In various solvents the cages behave differently. For instance, in dichloromethane the cage with smallest window size takes up NEt₄⁺ but not NMe₄ ^{+ ,} which is in contrast to the two cages with larger windows hosting both ions. To find out the reason for this, kinetic experiments were carried out to determine the velocity of uptake but also to deduce the activation barriers for these processes. To support the experimental results, calculations for the guest uptakes have been performed by molecular mechanics’ simulations. Finally, the complexation of pharmaceutical interested compounds, such as acetylcholine, muscarine or denatonium have been determined by NMR experiments.     

Flame retardancy and smoke suppression of silicone foams with microcapsulated aluminum hypophosphite and zinc borate

The flame‐retardant microcapsules were successfully fabricated with an aluminum hypophosphite (AHP) core. Fourier transform infrared (FTIR) and X‐ray photoelectron spectroscopy (XPS) were used to verify that AHP was encapsulated in the microcapsules, and thermogravimetry analysis showed that microencapsulated AHP (MAHP) possessed higher thermal stability than that of AHP. Then, a flame‐retardant and smoke suppression system for silicone foams (SiFs) was obtained through a synergistic effect of MAHP and zinc borate (2ZnO·3B₂O₃·3.5H₂O). The mechanical properties, flame retardance, and smoke suppression of SiFs with MAHP and zinc borate were tested using the tensile test, limiting oxygen index (LOI) test, UL‐94 test, and cone calorimeter test. The mechanical properties indicated that the tensile strength and elongation at break of SiFs could evidently improve with the incorporation of MAHP. Compared with pure SiF, SiF8 with 4.5‐wt% MAHP and 1.5‐wt% zinc borate could achieve an LOI value of 30.7 vol% and an UL‐94 V‐0 rating, the time to ignition amplified almost six times, the peak heat release rate and total heat release were 51.10% and 46.00% less than that of pure SiF, respectively, the fire performance index increased nearly 13 times, and the fire growth index value was only 13.18% of pure SiF. Moreover, the partial substitution of zinc borate imparted a substantial improvement in both flame retardancy and smoke suppression. Especially, the peak smoke production rate and total smoke production of SiF8 were merely 38.46% and 38.84% of pure SiF.     

On the Role of Symmetry in Vibrational Strong Coupling: The Case of Charge‐Transfer Complexation

It is well known that symmetry plays a key role in chemical reactivity. Here we explore its role in vibrational strong coupling (VSC) for a charge‐transfer (CT) complexation reaction. By studying the trimethylated‐benzene–I₂ CT complex, we find that VSC induces large changes in the equilibrium constant K_DA of the CT complex, reflecting modifications in the ΔG° value of the reaction. Furthermore, by tuning the microfluidic cavity modes to the different IR vibrations of the trimethylated benzene, ΔG° either increases or decreases depending only on the symmetry of the normal mode that is coupled. This result reveals the critical role of symmetry in VSC and, in turn, provides an explanation for why the magnitude of chemical changes induced by VSC are much greater than the Rabi splitting, that is, the energy perturbation caused by VSC. These findings further confirm that VSC is powerful and versatile tool for the molecular sciences.     

Chemical constituents isolated from stems of Schisandra chinensis and their antifeedant activity against Tribolium castaneum

Abstract

One new sesquiterpene (α-iso-cubebenol acetate, 8), together with 9 known compounds (1-7, 9, 10) were isolated from the stems of Schisandra chinensis (Turcz.) Baill. by repeated silica gel column chromatography. Based on the results of MS, NMR spectra and comparing with literature data, the six dibenzocyclooctadiene lignans were identified as schizandrin A to C (1-3), schizandrin (4), schisantherin A (5) and gomisin J (6), the two sesquiterpenes were identified as α-iso-cubebenol (7) and α-iso-cubebenol acetate (8), while the two triterpenic acids were identified as ganwuweizic acid (9) and kadsuric acid (10). The antifeedant activity of the 10 compounds against Tribolium castaneum adults was tested. Gomisin J (6) exhibited activity at 1500?ppm concentration with 40.3% antifeeding index percentages. As for the dibenzocyclooctene lignans (compounds 1–3, 6), the number of methylenedioxies and the position of hydroxyl groups were the main factors to affect their antifeedant activities.     

不同进风型式下气体冷却服中空气流动与换热的研究

根据气体冷却服的特点,对不同进风型式下气体冷却服中空气流动与换热进行研究。建立了进气口加设挡板层、进气口带均流器型和直吹型3种型式气体冷却服(服装夹层)中冷却空气流动过程的数学模型。对气体的流动过程进行分析,结果表明:不同的进风型式对气体冷却服空气层的温度分布状况、平均气流流速、平均温度、对流散热量影响较大;其中进气口加设挡板层的服装空气夹层温度分布最均匀,进气直吹型的平均气流流速最大,对流散热效果最好。研究结果为气体冷却服进一步的布风优化设计提供了理论和应用依据。